Will Mini LED be the mainstream direction of future display technology? Discussion on Mini LED and Micro LED technology

What is Mini-LED?

The length of the Mini-LED is usually about 0.1mm, and the default size range in the industry is between 0.3mm and 0.1mm. The small size means that the light points are smaller, the lattice density is greater, and a smaller light control area can be achieved. Moreover, these tiny Mini-LED chips can have very high brightness.

The so-called LED is much smaller than the size of ordinary LED. The Mini LED can be used to make color displays. The smaller size gives them a cost advantage and reliability, and Mini leds consume less energy.

What is Micro-LED?

A Micro-LED is a chip smaller than a Mini-LED, usually defined as below 0.05mm chip.

Micro-LED chips are much thinner than OLED displays. Micro-LED displays can be made very thin. Micro-leds are typically made of gallium nitride, a material that lasts longer and is less prone to wear. The microscopic properties of micro-leds enable them to achieve very high pixel densities, producing sharp images on the screen. With its high brightness and high-quality display picture, its various performance easily outperforms OLED.

The main difference between Mini LED and Micro LED

★ Size difference

★ Difference in brightness and contrast

★ Difference in color accuracy

★ Differences in thickness and form factors

★ Differences in perspective

★ Aging problem, life difference

★ Structural differences

★ Differences in pixel control

★ Differences in application flexibility

★ Differences in manufacturing complexity

★ Micro LED and mini LED: cost difference

★ Differences in efficiency

★ Scalability differences

★ Difference in response time

★ Differences in life and reliability

★ Differences in application

Conclusion:

As mentioned earlier, there is no technology competition between Mni-LED and Micro-LED, so you don't have to choose between them, they are all aimed at different audiences. In addition to some of their disadvantages, the adoption of these technologies will bring a new dawn to the display world. Micro-LED technology is relatively new, and with the continuous evolution and progress of its technology, you will use the high-quality picture effect of Micro-LED in the near future, and the light and convenient use experience. It may turn your phone into a soft card, or your TV at home into just a sheet of cloth or decorative glass.

Fountyl Technologies PTE Ltd, is focusing on semiconductor manufacturing industry, main products include: Pin chuck, porous ceramic chuck, ceramic end effector, ceramic square beam, ceramic spindle, welcome to contact and negotiation！